Items where Subject is "T Technology > T Technology (General)"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | C | D | H | J | K | L | M | N | P | S | T | W | Y | Z
Number of items at this level: 60.

A

Abdulwehab A., Ibrahim and Ahmedb, Aizat and Husseinc, Riyad O and Chong, Perk LInd and Zewge, Mesfin G. and Oumer, A. N. (2018) Computational fluid dynamics analysis of multiphase flow in crude oil pipelines. IEEE Xplore.

Al-Faqheri, Wisam and Ibrahim, Fatimah and Tzer, Hwai Gilbert Thio and Bahari, Norulain and Arof, Hamzah and Rothan, Hussin A. and Yusof, Rohana and Madou, Marc (2015) Development of Passive Liquid Valve (PLV) Utilizing a Pressure Equilibrium Phenomenon on the Centrifugal Microfluidic Platform. Sensors, 15 (3). pp. 4658-4676. ISSN 1424-8220

Amir, Al-Falahi and Yusaf, T. and Yusoff, M. Z. (2006) Universiti Tenaga Nasional short duration hypersonic test faciliy "calibration and verification". In: ASME 8th Biennial Conference on Engineering Systems Design and Analysis. ASME, pp. 541-549. ISBN 0-7918-4248-7

Arwinder, Singh* and Teh, Thaim Oun and Ng, Xue Yinn and Ng, Chee An and Wong, Jun Wen and Saw, Sor Heoh and Lee, Sing (2018) A Numerical Study on the Ion Production in the INTI International University Plasma Focus Machine using Nitrogen Gas. Thai Journal of Physics, 35 (1). pp. 1-9.

B

Batumalay, Malathy* and Wadi Harun, Sulaiman and Ninik, Irawati and Ahmad, Harith and Arof, Hamzah (2015) A Study of Relative Humidity Fiber-Optic Sensors. IEEE Sensors Journal, 15 (3). pp. 1945-1950. ISSN 1530-437X

C

Chan, Choon K and Girma, T. Chala* (2018) IMPACT OF NUMBER OF ATTRIBUTES ON THE ACCURACY OF HUMAN MOTION CLASSIFICATION. Journal of Engineering Science and Technology, 13 (7). pp. 1967-1978.

Chen, Kok Wai (2013) Crisis Of Manpower Resources In Malaysian Construction Industry. Other thesis, INTI INTERNATIONAL UNIVERSITY.

Chong, Alain Yee Loong and Ooi, Keng Boon and Darmawan, Nathan and Lee, Voon Hsien (2010) Determinants of 3G Adoption in Malaysia: A Structural Analysis. Journal of Computer Information Systems, 51 (2). pp. 71-80. ISSN 2380-2057

Chong, Mee Yoke and Numan, Arshid and Liew, Chiam Wen and Ng, H. M. and Ramesh, K. and Ramesh, S. (2018) Enhancing the performance of green solid-state electric double-layer capacitor incorporated with fumed silica nanoparticles. Journal of Physics and Chemistry of Solids, 117. pp. 194-203.

Chua, Kheng Ee and Chan, Siew Chong (2018) Awareness study of passive ventilation system in office building. INTI JOURNAL, 2 (2). ISSN e2600-7920

Chua, Mei King (2013) Waste Management In Construction Site. Other thesis, INTI INTERNATIONAL UNIVERSITY.

Chuah, Keng Hoo and Wang, Xiao Meng and Yap, Neng Yi and Cheong, Shi Wei (2019) Capturing the Fire Whirls Heights and Rotational Speed by High Speed Camera. INTI JOURNAL, 2019 (21). ISSN e2600-7920

D

Damideh, V. and Chin, O.H. and Saw, S. H. and Lee, P. C. K. and *Lee, S. (2019) Characteristics of Fast ion beam in Neon and Argon filled plasma focus correlated with Lee Model Code. Vacuum, 169 (108916). ISSN 0042-207X

H

Harith, Zuraidah and Ninik, Irawati and Hartini, Ahmad Rafaie and Batumalay, Malathy* and Sulaiman, Wadi Harun and Roslan, Md Nor and Ahmad, Harith (2015) Tapered Plastic Optical Fiber Coated With Al-Doped ZnO Nanostructures for Detecting Relative Humidity. IEEE Sensors Journal, 15 (2). pp. 845-849. ISSN 1530-437X

Ho, Soon Min (2019) The Characterizations and Studies of Chemical Bath Deposited Ni3Pb2S2 Thin Films for Solar Cell. INTI JOURNAL, 2019 (39). ISSN e2600-7920

Ho, Soon Min and Ayeshamariam, A (2019) REVIEW OF RECENT RESEARCH ON PENTERNARY NANOSTRUCTURED THIN FILMS. ARPN Journal of Engineering and Applied Sciences, 14 (1). pp. 271-277. ISSN 1819-6608

J

Jamaluddin, Jaafar and Januar, P.S and Mat Piah, Mohd Bijarimi and Tezara, C. and Adnan, Sharamiza and Rihayat, Teuku (2018) Influence of Selected Treatment on Tensile Properties of Short Pineapple Leaf Fiber Reinforced Tapioca Resin Biopolymer Composites. Journal of Polymers and the Environment, 26 (11). pp. 4271-4281.

K

Kee, Jasmine Sze Jye and Nik Fatma Arisya, Nik Yahya (2016) The Implementation of Safety Management: Construction Parties Perspective. INTI Journal Special Edition – Built Environment. pp. 27-29. (In Press)

Khan, M. M. H and Chiang, Jeffrey C. L. (2014) Using Mobile Devices & Social Media in Supporting Engineering Education. In: 2014 IEEE Global Engineering Education Conference (EDUCON), 03 Apr - 05 Apr 2014, Istanbul, Turkey.

L

Lai, Zhi Yin and Mohd Amir Shazwan, Hashim (2016) The Importance of Safety and Health Measures during Construction Stage. INTI Journal Special Edition – Built Environment. pp. 11-13. (In Press)

Lim, Celia Han Jia (2014) Planning And Scheduling Technique In Project Management: A Study on Critical Path Method (CPM) to Improve Project Completion Time. Other thesis, INTI INTERNATIONAL UNIVERSITY.

Lim, Desmond Eng Hong and Chan, Siew Chong (2018) Financial barriers in achieving CIDB IBS Roadmap in Malaysia private sector construction industry. INTI JOURNAL, 2 (4). ISSN e2600-7920

Lim, Kim Yew and Maysoon Hanaa, Mohamodhossen and Wong, Chee Hoo and Ng, Alex, Hou Hong and Tan, Owee Kowang (2019) Social Media Factors and Purchase Intention of Beauty Products in Mauritius. INTI JOURNAL, 2019 (44). ISSN e2600-7920

Low, Wen Pei and Chang, Fung Lung and Siow, Jia Min (2019) Pollutants Removal from Contaminated Water using Agricultural Tea Waste (Camellia Sinensis). INTI JOURNAL, 2019 (40). ISSN e2600-7920

M

Maarof, M.I and Samoh, Ehsan and Girma, T. Chala and Rishan, Murali (2018) Development of an after-market universal fuel gauge for motorcycle. International Journal of Mechanical Engineering and Technology, 9 (8). pp. 391-396. ISSN Print: 0976-6340/ ISSN Online: 0976-6359

Masidah*, Abdul Majid and Wardah Fatimah, Mohammad Yusoff and Abdul Razak, Sapian (2020) Women in Construction Boots: The Enabling Factors from the Perspective of Female Adolescents. International Journal of Psychosocial Rehabilitation, 24 (02). pp. 2011-2018. ISSN 1475-7192

Mohammad Hazim, Mohamad Hamdan and Januar, Parlaungan Siregar and Cionita*, Tezara and Jamiluddin, Jaafar and Agung, Efriyohadi and Ramli, Junid and Ahmad, Kholil (2019) Water absorption behaviour on the mechanical properties of woven hybrid reinforced polyester composites. The International Journal of Advanced Manufacturing Technology, 104. pp. 1075-1086. ISSN 1433-3015

Mohammad Hazim, Mohamad Hamdan and Januar, Parlaungan Siregar and Thomas, Sabu and Jamiluddin, Jaafar and *Tezara, Cionita (2019) Mechanical performance of hybrid woven jute–roselle-reinforced polyester composites. Polymers and Polymer Composites, 27 (7). ISSN 0967-3911

Mohana, Muniandy and Heng, Alex Kong Yew (2019) Cross-Platform Personal Life Management App Using Data Analytics. INTI JOURNAL, 2019 (37). ISSN e2600-7920

Muhammad Izzat Nor, Ma'arof and Muhammad Bilal, Chaudhry and Baveendra Kumar, Premakumar and Joseph, Gerald Victor Richard and Girma, Tadesse Chala (2019) Power Generation from Industrial Wastewater using Microbial Fuel Cell. INTI JOURNAL, 2019 (18). ISSN e2600-7920

Muhammad Izzat Nor, Ma'arof and Rishan, Murali and Lim, Jin Wei and Mohd Amir Shazwan, Hashim and Girma, Tadesse Chala and Chai, Chuan Ern (2019) A Short Review on Factors that Impact the Backpressure of exhaust manifold of spark ignition engine. INTI JOURNAL, 2019 (20). ISSN e2600-7920

Muhammad Izzat Nor, Ma'arof and Sathurshan, Suresh and Shaheerthana, Suresh and Yuli Panca, Asmara and Girma, Tadesse Chala (2019) The Development of an Aftermarket Intercooler Spray for Turbocharged Vehicles using Water. INTI JOURNAL, 2019 (17). ISSN e2600-7920

Muhammad Izzat Nor, Ma'arof and Vinod Krishnan, K.Arvindra Dass and Hazran, Husain and Choo, Wou Onn and Girma, Tadesse Chala (2019) A Study on the Development of the Make-shift Heat Pump for Refugee Camp: A Case Study of Borneo State, Nigeria. INTI JOURNAL, 2019 (14). ISSN e2600-7920

Muhammad Izzat Nor, Ma'arof and Vong, Ratanakvisal and Lim, Jin Wei and Amir Radzi, Ab Ghani and Girma, Tadesse Chala (2019) Design and Analysis of the Suspension Upright Structure of a Formula SAE Car. INTI JOURNAL, 2019 (19). ISSN e2600-7920

Munir, H. K. and Muhammad, Nur Shazwani and Al-Shafie, Ahmed (2018) Wavelet-ANN versus ANN-based model for hydrometeorological drought forecasting. Water, 10 (998). pp. 1-21.

N

Ng, Choon Eu (2014) The Acceptance of Industrialised Building Systems. Other thesis, INTI INTERNATIONAL UNIVERSITY.

Ngu, Vivian, Xiang Wen and Sam, Man Keong (2018) A study of factors affecting the labour productivity of construction projects in Sarawak. INTI JOURNAL, 2 (6). ISSN e2600-7920

Nik Fatma Arisya, Nik Yahya and Appadoo, Heshna (2018) The application of measurement software by quantity surveying firms in Klang Valley. INTI JOURNAL, 2 (7). ISSN e2600-7920

Noorizam, Nukhairiah Sakinah (2014) The Practice of Heritage Building Conservation in Kuala Lumpur, Malaysia. Other thesis, INTI INTERNATIONAL UNIVERSITY.

Norul Izzati, M. Ashaari and Mohd Amir Shazwan, Hashim and Yong, Sheve Huey (2019) Cost Overrun in Construction Projects in Malaysia: A Study on Contractor Related Factors. INTI JOURNAL, 2019 (52). ISSN e2600-7920

Nur F., Zulkifli and Malathy*, Batumalay and Farina, S.M.Samsamnun and Mohamad, B.H.Mahyuddin and Tengku F., T.M.N.Izam and Muhammad I.M., A.Khudus and Sulaiman, W.Harun (2019) Q-switching pulses generation with samarium oxide film saturable absorber. Microwave and Optical Technology Letters, 62 (3). pp. 1049-1055. ISSN 1098-2760

P

Phon Chai, Priyanut (2013) Industrialized Building System In Malaysia Construction Industry. Other thesis, INTI INTERNATIONAL UNIVERSITY.

S

Siti Nur Fatihah, Moideen and Mohd Fadhil, Md Din and Shahabaldin, Rezania and Mohanadoss, Ponraj c and Azlan, Abd Rahman and Low*, Wen Pei and Zulhilmi, Ismail and Shazwin, Mat Taib and Li, Yu-You (2020) Dual phase role of composite adsorbents made from cockleshell and natural zeolite in treating river water. Journal of King Saud University - Science, 32. pp. 1-6. ISSN 1018-3647

Sumra, Yousuf and Payam, Shafigh and Zainah, Ibrahim and Huzaifa, Hashim and Mohammad, Panjehpour (2019) Crossover effect in cement-based materials: A review. Applied Sciences, 9 (14). ISSN 2076-3417

T

Tan, Chih Yong and Seyed, Amirmostafa Jourabchi and Ng, Hoon Kiat and Gan, Suyin (2019) Investigation on Viability of Solar Panel Covered Carpark Project for Inti International University. INTI JOURNAL, 2019 (50). ISSN e2600-7920

Tan, Yeong Hwang and Chai, Mee Kin and Wong, Ling Shing (2018) A REVIEW ON EXTRACTION SOLVENTS IN THE DISPERSIVE LIQUIDLIQUID MICROEXTRACTION. Malaysian Journal of Analytical Sciences, 22 (2). pp. 166-174. ISSN 1394 - 2506

Tay, Zi Keng and Kong, Sio Kah (2018) Effectiveness of construction industry payment and Adjudication Act (CIPAA) in remedying payment issues among sub-contractors. INTI JOURNAL, 2 (5). ISSN e2600-7920

Tee*, Kah Hock and Girma, T. Chala* and How, H.Cheng (2020) An innovative hybrid steam-microwave sterilization of palm oil fruits at atmospheric pressure. Innovative Food Science and Emerging Technologies, 60.

Thio, Tzer Hwai Gilbert and Ibrahim, Fatimah and Al-Faqheri, Wisam and Soin, Norhayati and Bador, Maria Kahar and Madou, Marc (2015) Sequential Push-Pull Pumping Mechanism for Washing and Evacuation of an Immunoassay Reaction Chamber on a Microfluidic CD Platform. PLoS ONE, 10 (4).

Toe, Wai Yan and Kong, Sio Kah (2018) Building information modelling (BIM) in small and medium enterprises (SMEs) within Malaysian construction sector: implementation,. INTI JOURNAL, 2 (1). ISSN e2600-7920 (In Press)

W

Wai, Fun Choong and Mohd Amir Shazwan, Hashim and Abdolreza, Toudehdehghan (2018) Foreign workers reduction in Malaysian construction industry. INTI JOURNAL, 2 (8). ISSN e2600-7920

Wong, Amy, Zhi Lin and Chan, Siew Chong (2018) Cost issue: Key limiting factor that affects IBS application in Malaysian construction industry. INTI JOURNAL, 2 (3). ISSN e2600-7920

Wong, Yinn Han and Chan, Siew Chong (2016) 3d Printing Modelling In Malaysian Construction Industry. INTI Journal Special Edition – Built Environment. pp. 40-41. (In Press)

Wu, Han Yang (2013) Contractor All Risks (CAR) In Construction Projects. Other thesis, INTI INTERNATIONAL UNIVERSITY.

Y

Yap, Hao Ying (2014) The Incorporation Of It System Of Quantity Surveying Profession. Other thesis, INTI INTERNATIONAL UNIVERSITY.

Yau, Y.H. and Chuah, K.H. and Siew, M.T. (2020) The Study on Thermal Environment and Airflow Pattern in an UFAD System Under a Cooling Mode. Arabian Journal for Science and Engineering, 45 (2). pp. 891-908. ISSN 1319-8025

Yeo, Han Ming and Lee, Benny Hai Chim (2018) Value management as a cost control approach to improve project with value for money during design stage. INTI JOURNAL, 2 (9). ISSN e2600-7920

Yong, Yoong Kee (2013) The Impact caused by the natural disaster in Malaysia : Flood and Landslide. Other thesis, INTI INTERNATIONAL UNIVERSITY.

Yuli Panca, Asmara and Jeya Gopi, Raman and A.G.E., Sutjipto (2019) Predicting Temperature of Corrosion Scale Formation Carbon Steel in Oil and Gas Environment. INTI JOURNAL, 2019 (55). ISSN e2600-7920

Z

Zuraidah*, Harith and Huda Adnan, Abdullah Zain and Malathy, Batumalay and Sulaiman Wadi, Harun (2019) A study on relative humidity sensors using PVA and PMMA coating. Journal of Physics: Conference Series, 1371. pp. 1-9. ISSN 1742-6596

This list was generated on Sat Jun 6 03:58:45 2020 MYT.