Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | C | F | G | H | J | K | L | M | N | O | S | T | W | X | Y | Z
Number of items at this level: 60.

A

A.N., Oumer and Abdulwehab A., Ibrahim and Nuruzzaman, D.M and Khairi, Yusuf (2015) Simulation on Effect of Flow Induced Fiber Orientation on the Mechanical Properties of Fiber Reinforced Composites. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 2015, 11-13 October 2015, Johor Bahru, Johor, Malaysia.

Abdulwehab A., Ibrahim and Ezrann Zharif, Zainal Abidin and A. Rashid, A. Aziz and Saiful A., Zulkifli (2013) Effect of Injection Timing on the Operation of Hydrogen-Fuelled Free- Piston Linear Generator Engine during Starting. International Journal of Automotive Engineering, 4 (2). pp. 47-53. ISSN 2185-0992

Al-Faqheri, Wisam and Ibrahim, Fatimah and Thio, Tzer Hwai Gilbert and Arof, Hamzah and Madou, Marc (2013) Novel Liquid Equilibrium Valving on Centrifugal Microfluidic CD Platform. 2013 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC). p. 5512. ISSN 1094-687X

Arvin, Tandy (2015) Infrared (IR) Investigation of the Flame Structures in Laboratory Scale Fire Whirls. Other thesis, INTI International University.

Asmara, Y. P. and Siregar, Januar Parlaungan and Tezara, C. and Chang, Tai Ann (2016) Improving Efficiency of Aluminium Sacrificial Anode Using Cold Work Process. IOP Conference Series: Materials Science and Engineering,, 114 (1). ISSN 1757-8981

C

Chala, Girma T.* and Shaharin, A. Sulaiman and Azuraien, Japper-Jaafar and Wan Ahmad Kamil, Wan Abdullah (2016) Investigation of convective heat transfer coefficient and initial temperature of waxy crude oil on the formation of voids. International Journal of Automotive and Mechanical Engineering, 13 (3). 3754 -3762. ISSN 2180-1606

Cheah, Yee Hong and Gan, Chin Yeow and Hong, Ching Wah and Momin, Nor Jamiiadd (2015) Resolution to Walls Surfaces Condensation & Mould Growth Issue in an 24-hours Air Conditioned Room. Other thesis, INTI International University.

Chew, Weiee (2015) A Parametric Study of Low Wind Speed Enhancement System. Other thesis, INTI International University.

Chung, Wye Kit and Po, Jiang Ling* and Adib Kabir, Chowdhury (2016) Detection mechanism of an autonomous vehicle: Self recognising obstructions. IEEE, 2016 International Conference on Advances in Electrical, Electronic and Systems Engineering (ICAEES). ISBN 978-1-5090-2889-4

F

F.A., Fauzi and Z., Ghazalli and Siregar, J.P. and Tezara, C. (2016) Investigation of Thermal Behavior for Natural Fibres Reinforced Epoxy using Thermogravimetric and Differential Scanning Calorimetric Analysis. MATEC Web of Conferences, 78. ISSN 2261-236X

Flynn, Sean Michael Moore (2015) Investigation on Small Pumped Storage Installations for Load Balancing and Back-up Water Storage Application. Other thesis, INTI International University.

G

Girma, T. Chala* and Shaharin, A. Sulaiman and Azuraien, Japper Jaafar (2018) Flow start-up and transportation of waxy crude oil in pipelines-A review. Journal of Non-Newtonian Fluid Mechanics, 251. pp. 69-87. ISSN 0377-0257

H

Hajjaj, S. and Pun, N.* (2013) Design and development an insect-inspired humanoid gripper that is structurally sound, yet very flexible. IOP Conference Series: Earth and Environmental Science, 16 (1). ISSN 1755-1315

Hamdan, M. H. M. and Siregar, J. P. and Bachtiar, Dandi and Rejab, M.R.M. and Samykano, M. and Agung, E. H. and Tezara, C.* and Jaafar, J. (2017) Effect of alkaline treatment on mechanical properties of woven ramie reinforced thermoset composite. IOP Conference Series: Materials Science and Engineering,, 257. ISSN 1757-8981

Hassan, Ahsham (2018) An Investigation On The Performance And Emission Of Gas Turbine Running On Syngas. Other thesis, INTI INTERNATIONAL UNIVERSITY.

H’ng, Jia Yun (2015) Work Methods for Packaging Line for the Butterfly Extension Dining Set at Latitude Treefurniture Sdn. Bhd. Other thesis, INTI International University.

J

Joyce, Edwin Bategeleza and Deepak, Tirumishi Jada and Eric, L.W.K and Munir, H. K. (2015) Using Four Types Of Notches For Comparison Between Chezy’s Constant(C) And Manning’s Constant (N). International Journal of Scientific & Technology Research (IJSTR), 4 (10). ISSN 2277-8616

K

Ker, De Kuan and Ng, Samuel ShenqJye and Seow, Zhen Liang and Low, Shu Boey (2015) Resolution to Walls Surfaces Condensation & Mould Growth Issue in an 24-hours Air Conditioned Room. Other thesis, INTI International University.

L

Lai, Chien Sin (2015) A Study on a Real Case Indoor Thermal Environment Installed with an Under-Floor Air Distribution System in the Tropics. Other thesis, INTI International University.

Lee, Seng Joe (2018) Investigation of Cooling in The Air Conditioning Room Working Concurrently With Air Discharge and Air Inlet System. Other thesis, INTI INTERNATIONAL UNIVERSITY.

Liew, Hui Jin (2015) The Evaluation of Design Guidelines for Stratum Ventilation in the Tropics. Other thesis, INTI International University.

Lim, J.W. and Chew, L.H. and Choong, Thomas S.Y. and Tezara, C. and Yazdi, M.H. (2016) Overview of Steel Slag Application and Utilization. MATEC Web of Conferences, 74. ISSN 2261-236X

Lim, J.W.* and Lee, K. F.* and Chong, Thomas S.Y. and Abdullah, L. C. and Razak, M. A. and Tezara, C.* (2017) Phosphorous removal by electric arc furnace steel slag adsorption. IOP Conference Series: Materials Science and Engineering,, 257 (1). ISSN 1757-8981

Lim, Ying Pio* and Yeo, Wei Hong* and Azliana, Masita (2017) Effect of heat treatment on gravity die-cast Sc-A356 aluminium alloy. Manufacturing Review, 4 (3). ISSN 2265-4224

Loh, U-Jo and Woon, Soon Kwen and Perera, Prashan and Wong, Siong Weng (2015) Resolution to Wall Surfaces Condensation & Mould Growth Issue in a 24 Hours Air Conditioned Room. Other thesis, INTI International University.

M

M., Davindra Brabu and Januar, P.S and Mohd Ruzaimi, Mat Rejab and Dandi, B. and Cionita, Tezara (2017) The mechanical properties of alkaline treated pineapple leaf fibre to reinforce tapioca based bioplastic resin composite. Materials Science Forum, 882. pp. 66-70. ISSN 1662-9752

Ma'arof M.I.N., M.I.N and Chaka, G.T and Yang, E.T.K. (2018) AN INVESTIGATION ON MOTORCYCLE WINDSHIELD DESIGNS FOR ENHANCED AERODYNAMIC FEATURE. International Journal of Mechanical Engineering and Technology, 9 (9). pp. 106-113. ISSN Print: 0976-6340 Online: 0976-6359

Ma'arof M.I.N., M.I.N and Chala, Girma T.* and Ravichanthiran, Saravanan (2018) A study on microbial fuel cell (MFC) with graphite electrode to power underwater monitoring devices. International Journal of Mechanical and Technology, 9 (9). pp. 98-105. ISSN Print: 0976-6340 ISSN Online: 0976-6359

Mathivanan, Davindrabrabu and Norfazilah, H. and Siregar, Januar Parlaungan and Rejab, M.R.M. and Bachtiar, Dandi and Cionita, Tezara (2016) The study of mechanical properties of pineapple leaf fibre reinforced tapioca based bioplastic resin composite. MATEC Web of Conferences, 74. ISSN 2261-236X

Mohammad, Hossein Yazdi* and Hashim, I. and Moey, L. K.* and Sopian, K. (2014) Slip Velocity Effect on Non-Newtonian Fluid Flow Over Moving Permeable Surface with Nonlinear Velocity and Internal Heat Generation/Absorption. International Review on Modelling and Simulations, 7 (4). pp. 661-670. ISSN 1974-9821

Mudzengi, Mayibongwe Tafara (2016) Exploring the Implementation of Solar Energy in Higher Education Institutions in Malaysia. Masters thesis, INTI International University.

N

Nadaraj, Sarvesh (2015) Experimental Investigation of Heat Transfer Over Machining Surfaces Using Infrared Camera. Other thesis, INTI International University.

Ng, Ivan Wen Xiong (2015) Comparison of Year Round Energy Performance with Different Ventilation Methods for ACMV Systems in the Tropics. Other thesis, INTI International University.

Ng, Zhi Siang (2015) Planar B-Spline Curve Interpolation with Various Parameterizations. Other thesis, INTI International University.

O

Oumer, A. N. and Abdul Wehab, A. Ibrahim and Nuruzzaman, D. M (2016) Simulation on effect of flow induced fiber orientatioin on the mechanical properties of fiber reinforced composites. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 10931-10934. ISSN 1819-6608

S

Saravanan, Ravichanthiran (2018) A Study on Microbial Fuel Cell (MFC) to Power Underwater Monitoring Device. Other thesis, INTI INTERNATIONAL UNIVERSITY.

Seyed, Amirmostafa Jourabchi (2017) Heat transfer analysis of laboratory scale fast pyrolysis fluidised bed reactor. AIP Conference Proceedings. ISSN 1551-7616

Shazwan, M. A.* and Quintin, J. V.* and Osman, N. A. * and Suhaida @ Suhana, Kamarudin Nurul Aini Osman* and Ma’arof, M. I. N.* (2017) The importance of cleanliness in a proper construction site management in malaysia: a contractor’s perspective. IOP Conference Series: Materials Science and Engineering,, 271. ISSN 1757-8981

Siregar, Januar Parlaungan and Cionita, Tezara and Bachtiar, Dandi and Mohd Ruzaimi, Mat Rejab (2015) Tensile properties of pineapple leaf fibre reinforced unsaturated polyester composites. Applied Mechanics and Materials, 695. pp. 159-162. ISSN 1662-7482

Siva Kumar, S. and Teow, L. H. and Ali, Niakan and K. C. L., Jeffery (2016) Densification behavior and properties of iron oxide doped Y-TZP ceramics. Journal of Engineering Science and Technology. pp. 176-187. ISSN 1823-4690

Sivakumar, Sivanesan and Teow, Hsien Loong and Ramesh, Singh and Niakan, Ali and Mase, Nobuyuki (2016) The Effect of Iron Oxide on the Mechanical and Ageing Properties of Y-TZP Ceramic. Key Engineering Materials, 701. pp. 225-229. ISSN 1662-9795

Srinivasan, M. and Praslad, S.M. (2005) Advanced thermoelectric energy recovery system in light duty and heavy duty vehicles: Analysis on technical and marketing challenges. 2005 International Conference on Power Electronics and Drives Systems, 2. ISSN 2164-5256

Sundramohan, Harish (2015) Investigation of the Ageing Behavior of As-Cast A356 Aluminium Alloy. Other thesis, INTI International University.

T

Tan, Chin Keat (2015) Investigation on Indentation Creep Performance of Carbon Nanotubes Reinforced Tin-58Bismuth Composites. Other thesis, INTI International University.

Tan, Meng Ee (2015) Effect of Water Absorption on Tensile Properties of Pineapple Leaf Fibre Reinforced Polymer Composites. Other thesis, INTI International University.

Tan, Thomas Siang Yaw (2017) Development Of An Integrated Modal Analysis Application Methodology For Base Pan Finite Element Model Validation. Other thesis, INTI INTERNATIONAL UNIVERSITY.

Tan, Yong Sin (2015) Heat Transfer Analysis of Laboratory Scale Reactor of Fast Pyrolysis Fluidised Bed. Other thesis, INTI International University.

Tan, Zhi Zhong (2015) Investigation of the Ageing Behavior of As-Cast Aluminium Alloy with Strontium-Addition. Other thesis, INTI International University.

Tan, Zhong Jian (2015) Computational Fluid Dynamics Simulation of Laboratory Scale Reactor of Fast Pyrolysis Fluidized Bed. Other thesis, INTI International University.

Teoh, Yan Heng and Teoh, Kai Dong and Heng, Zhi Kai and Koh, Ji Wei (2015) Countermeasure for Mould Growths in Operation Theatre. Other thesis, INTI International University.

Tezara, C. and Siregar, Januar Parlaungan and Lim, H.Y. and Fauzi, F.A. and Yazdi, Mohammad H. and Moey, L. K. and Lim, J.W. (2016) Factors that affect the mechanical properties of kenaf fiber reinforced polymer: A review. Journal of Mechanical Engineering and Sciences, 10 (2). pp. 2159-2175. ISSN 2231-8380

Thio, Tzer Hwai Gilbert and Ibrahim, Fatimah and Al-Faqheri, Wisam and Soin, Norhayati and Abdul Kahar, Maria Kahar Bador and Madou, Marc (2013) Multi-Level 3D Implementation of Thermo-Pneumatic Pumping on Centrifugal Microfluidic CD Platforms. 2013 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC). pp. 5513-5516. ISSN 1094-687X

Toudehdehghan, Abdolreza* and Lim, J. W.* and Foo, Kim Eng* and Ma'arof, M.I.N* and Mathews, J.* (2017) A brief review of functionally graded materials. MATEC Web Conferences, 131. ISSN 2261-236X

Toudehdehghan, Abdolreza* and Rahman, M. M. and Farrukh, Nagi (2017) Dynamic analysis of composite beam with piezoelectric layers under thermo-mechanical load. IOP Conference Series: Materials Science and Engineering,, 257. ISSN 1757-8981

Toudehdehghan, Abdolreza* and Rahman, M. M. and Tarlochan, F. (2017) Analyzing The Behavior of Classical Functionally Graded Coated Beam. MATEC Web of Conferences, 131. ISSN 2261-236X

W

Wahab, M. A.* and Ma’arof, M. I. N.* and Ahmad, I. N. and Husain, H. (2017) Potential utilization of biodiesel as alternative fuel for compression ignition engine in Malaysia. IOP Conference Series: Materials Science and Engineering,, 257 (1). ISSN 1757-8981

X

Xavier, A. and Lim, C. S. (2015) Simulation and Analysis of Temperature Distribution and Material Properties Change of a Thermal Heat sink Undergoing Thermal Loading in a Mobile Computer. IOP Conference Series: Materials Science and Engineering, 88 (1). ISSN 1757-899X

Y

Yap, Jun Yen (2015) Prediction of Energy Consumption in Malaysia Using Statistical Method. Other thesis, INTI International University.

Yau, Y.H. and Chuah, K.H. and Tey, M.R. and Yip, P.N. and Lim, C.S. and Chong, T.H. and Rajagopal, K. (2014) Feasibility study of using heat recovery devices in HVAC systems in a building in the tropics. In: Indoor Air 2014 - 13th International Conference on Indoor Air Quality and Climate, 7 - 12 July 2014, The Grand Hall, The University of Hong Kong.

Z

Zewge, Mesfin G. and Lemma, T. A. and Ibrahim, A. A. and Sujan, D. (2014) Modeling and Simulation of a Heat Recovery Steam Generator using Partially Known Design Point Data. Advanced Materials Research, 845. pp. 596-603. ISSN 1662-8985

This list was generated on Fri Nov 16 12:02:54 2018 MYT.